EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Cost Controller is actually a very effective photo voltaic controller designed for off-grid solar systems. Based on multiphase synchronous rectification technology, it assures optimized energy conversion and program security for a wide range of photovoltaic (PV) apps.
Key Characteristics on the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Solar Demand Controller technological know-how for superior solar energy harvesting. Vital attributes involve:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Highly developed MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery lifetime.
Liquid crystal display Show with true-time facts checking.
Various Load Handle Modes which include handbook and timer.
Comprehensive Electronic Protections towards overcharging, more than-discharging, quick circuits, and reverse polarity.
Move-by-Stage Information to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Be certain all components are incorporated: Tracer AN device, temperature sensor, communication cables, and user guide.
Verify the model number and voltage scores match your photo voltaic panel and battery specs.
two. Mounting the Demand Controller
Pick out a perfectly-ventilated, dry area near to the battery bank.
Secure the Tracer AN controller utilizing the provided mounting brackets.
Preserve appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Often comply with appropriate security protocols and make sure the process is driven off prior to connecting components.
Action 1: Connect the battery terminals into the cost controller (optimistic to good, destructive to detrimental).
Stage 2: Hook up the solar panel array to the PV enter terminals.
Phase 3: Hook up the load terminals if utilizing a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electrical power on the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Management.
5. Checking and Information Logging
The Tracer AN Collection supports actual-time monitoring utilizing the MT50 remote meter.
Facts could be logged by using the RS485 conversation port utilizing program for instance Photo voltaic Station Computer.
Distant monitoring is possible with the EPEVER WiFi module.
6. Troubleshooting Common Challenges
Situation 1: No Electric power Output
Examine battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation two: In excess of-Voltage Protection
Confirm the solar array’s voltage ranking.
Adjust process parameters if vital.
Concern three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT options within the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification engineering makes sure:
Greater Performance: Reduced Strength losses during conversion.
Improved Trustworthiness: Stable effectiveness below variable masses.
For a longer period Battery Existence: Reliable More info and accurate charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification technologies is really an exceptional choice for optimizing solar energy technology and extending battery life. By adhering to the above mentioned setup guidebook, buyers can make sure most efficiency and system longevity.