EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Photo voltaic Charge Controller is often a highly effective solar controller created for off-grid photo voltaic devices. According to multiphase synchronous rectification know-how, it makes sure optimized Electricity conversion and procedure stability for a wide range of photovoltaic (PV) applications.

Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technology for exceptional solar Power harvesting. Important functions involve:

Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
Innovative MPPT Algorithm with >99% effectiveness.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Display with real-time data checking.
Numerous Load Management Modes like guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, brief circuits, and reverse polarity.
Phase-by-Stage Tutorial to Setting Up the EPEVER Tracer AN Sequence Controller
1. Unboxing and Making ready the Controller
Ensure all elements are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer handbook.
Validate the design amount and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Cost Controller
Select a effectively-ventilated, dry place close to the battery bank.
Safe the Tracer AN controller utilizing the provided mounting brackets.
Sustain suitable clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Usually comply with suitable security protocols and ensure the method is driven off ahead of connecting elements.

Move one: Join the battery terminals to the demand More info controller (favourable to constructive, adverse to damaging).
Step 2: Link the photo voltaic panel array on the PV input terminals.
Step three: Connect the load terminals if employing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability to the controller by connecting the battery initial.
Use the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Handle Modes: Manual, timer, gentle Handle.
five. Monitoring and Facts Logging
The Tracer AN Series supports real-time checking using the MT50 distant meter.
Data might be logged by way of the RS485 interaction port working with software program which include Solar Station Computer system.
Remote checking is feasible With all the EPEVER WiFi module.
six. Troubleshooting Frequent Difficulties
Concern 1: No Energy Output

Look at battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem 2: More than-Voltage Safety

Validate the solar array’s voltage score.
Adjust process parameters if necessary.
Difficulty 3: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:

Larger Performance: Reduced Strength losses throughout conversion.
Improved Trustworthiness: Stable effectiveness under variable masses.
Longer Battery Lifetime: Constant and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological innovation is an Extraordinary option for optimizing solar power era and increasing battery life. By adhering to the above mentioned setup guidebook, people can ensure highest performance and system longevity.